The IColor 2-Step Select Transfer Media set will allow you to transfer prints from the IColor series of printers (including white and fluorescent color prints) onto a variety of garments, especially dark fabrics. The translucent adhesive applied as a result of the 2-step process increases the adhesion to your garment for increased durability, opacity and vibrancy on your finished product. Rasterization and breathability integrated into your design, as well as using the garment color as a mask, will enhance the stretch limit and softness of your finished product.
IColor 2-Step Select Transfer Media works at a higher temperature as compared to the IColor Premium media (310°F / 154°C), so some care must be taken when pressing onto some types of synthetic material such as nylon or polyester. Spandex or lycra material is not recommended at this temperature. This media has several advantages which complements UNINET's robust line of transfer media. It has a matte texture instead of a shiny finish, and has a very strong adhesive which helps prevent images from pulling apart. This lower cost media is a great everyday choice for textile transfers. Finished garments will last between 30 - 50 washes depending on how it’s laundered. It is recommended to wash finished garments inside out in cold or warm water and low agitation.
Note: The IColor 550/560 only support the A4 media type.
Note 2: Sold in quantities of 100. 1 qty. = 100 A+B kits.